Flat Roof Integrity Testing

Detect flat roof leaks early – protect your property’s long-term value.

ILD
Integrity Testing

Prevent problems with an integrity test by our experts and identify damage to your flat roof before it's too late.

ProtectSys
Integrity Testing System

More than a test – ProtectSys is a professional system for early leak detection and long-term flat roof protection.

Integrity test

With ILD, you have a competent partner at your side who specializes in leak testing for flat roofs. We reliably detect existing leaks early on by conducting a comprehensive roof inspection during the building inspection.

Your Benefits

Trusted since 1996
Professionally certified technicians
Proven methods for leak testing
Installation of innovative leak detection systems
State-of-the-art technical equipment
Your contact person
Klaus Holm, Chief Executive Officer (CEO), ILD +49 6021 62619 0 klaus.holm@ild-group.com Get in touch

Detect Leaks In Roof Waterproofing Early

A leak test for your flat roof ensures that it is protected against moisture and leaks by detecting and resolving them early.

ILD offers innovative measurement methods to ensure the integrity of your roof and detect damage early. Thanks to our professional services, you can significantly increase the safety of your building and the lifespan of your roof.

ILD offers a comprehensive and professionally conducted leak test for every flat roof. Our measuring technology enables precise inspection of the waterproofing and can detect leaks early on. Regardless of whether it is a new construction or an existing building, our company will perform the leak test for your flat roof quickly and reliably.

We naturally offer you a customized and personal service, with all measurements performed precisely tailored to the specific requirements of your building.

Measurement Techniques

With our innovative leak detection techniques, we enable effective and rapid damage repair in a wide variety of situations. We rely on state-of-the-art technology and the following proven measurement methods.

Integrity Testing System

Our innovative leak detection system, ProtectSys CONTROL, tests your building’s waterproofing quickly, reliably, and with precision – for maximum safety before use.

What You Gain

Reliable integrity test of the roof
Precise localization of leaks
Patented measuring technology
Avoiding costly repairs
Avoiding consequential damage
Prevention of water damage
Your contact person
Klaus Burger, Chief Executive Officer (CEO), ProtectSys +49 6021 62619 71 klaus.burger@protectsys.de Get in touch

ProtectSys CONTROL – Precision Leak Testing at the Right Moment

Moisture damage in flat roofs often goes unnoticed—until costly repairs are needed. A professional integrity test detects even the smallest leaks before they become serious. ProtectSys CONTROL delivers precise, targeted measurements—efficient, reliable, and completely non-invasive.

With over 25 years of experience, we know: more than 50% of all flat roofs are already leaking at the time of handover. Without regular inspections, roof tightness becomes an unpredictable risk—like surfing the internet without antivirus protection.

ProtectSys CONTROL delivers security through targeted testing—exactly when it’s needed.

Unlike permanent monitoring systems, ProtectSys CONTROL offers precise, on-demand analysis at the right time. This allows leaks to be detected early and costly damage to be prevented. Preventive testing is the key to a durable, well-maintained flat roof.

Our Leak Detection System

FAQ

Which Methods Are Used to Test Flat Roof Integrity?

We use various proven methods to test the waterproofing of flat roofs. These techniques not only determine whether the roof is watertight, but also allow for highly precise leak detection.

One of the most widely used methods is potential equalization testing, also known as the Electric Field Vector Mapping (EFVM®) method. It works by creating an electric field across the roof membrane to accurately locate leaks. A major advantage of this technique is that it can be applied even in hard-to-access areas—such as green roofs, gravel-covered roofs, terrace systems, or underground garage membranes.

In warm roof constructions, where the waterproofing layer lies above the insulation, the test current may not always find a conductive return path. To ensure reliable testing in these cases, ProtectSys offers a specialized procedure that combines the benefits of EFVM with a conductive layer installed beneath the membrane.

In addition to EFVM, we offer other certified leak detection methods that can identify damage early and with pinpoint accuracy. After each inspection, we provide a detailed report on the condition of your flat roof.

How Long Does Flat Roof Leak Testing Take?

The duration of a flat roof integrity test depends on the size and construction of the roof. In most cases, a thorough inspection can be completed within a short time frame—typically without any disruption to building operations.
You’ll receive a clear and reliable assessment of your roof’s condition in no time.

What Does a Flat Roof Leak Test Cost?

The cost of a flat roof integrity test depends on several factors: the testing method used, the size of the roof, and any additional effort required due to specific roof conditions.

At ILD, we believe in transparent pricing and tailored solutions. After a detailed consultation, we’ll gladly provide you with a customized quote that meets the exact needs of your building.

Contact Us
Portrait von
Your contact person
Pinar Cicek, Secretary to the Management +49 6021 62619 0 info@ild-group.com